Plug-in Power Adapter, 24 V / 90 W
A 24 V Plug-in Power Supply that is designed for compatibility with DLC LED lighting products. Ideal for retail and architectural applications.
  Class 2
FEATURES
Universal AC input / full range
89% – 90% efficiency
Built-in active PFC function
Class 2 Power Supply
Protections: Short circuit / Over current / Over voltage / Over temperature
Fanless design, cooling by free air convection
No load power consumption < 0.15 W
UL listed, suitable for dry and damp environments
| Input | |
| Voltage Range 1 | 90 ~ 264 VAC / 127 ~ 370 VAC |
| Frequency Range | 47 ~ 63 Hz |
| Power Factor | PF > 0.98 / 115 VAC; PF > 0.96 / 230 VAC at full load |
| Total Harmonic Distortion | < 20% when output loading ≧ 60% at 115 VAC / 230 VAC |
| Efficiency | 115 VAC: 89%; 230 VAC: 90% |
| AC Current | 0.95 A / 115 VAC; 0.5 A / 230 VAC |
| Inrush Current | Cold start: 30 A (twidth = 550 ÎĽs measured at 50% Ipeak) at 115 VAC Cold start: 60 A (twidth = 550 ÎĽs measured at 50% Ipeak) at 230 VAC |
| Max. Number of PSUs / 16 A Circuit Breaker | 3 units (type B circuit breaker) 6 units (type C circuit breaker) at 230 VAC |
| Leakage Current | <0.125 mA / 120 VAC <0.25 mA / 240 VAC |
| Output | |
| DC Voltage | 24 VDC |
| Constant Current Region | 14.4 ~ 24 V |
| Rated Current | 3.75 A |
| Rated Power | 90 W |
| Ripple and Noise 2 | 150 mVp-p |
| Voltage Tolerance 3 | ± 3% |
| Line Regulation | ± 0.5% |
| Load Regulation | ± 0.5% |
| Setup, Rise Time 4 | 500 ms, 80 ms at 95% load 115 VAC / 230 VAC |
| Hold Up Time (Typ.) | 16 ms at full load 115 VAC / 230 VAC |
| Protection | |
| Over Current | 95% ~ 108% Protection type: Constant current limiting, recovers automatically after fault condition is removed |
| Short Circuit | Hiccup mode, recovers automatically after fault condition is removed |
| Over Voltage | 28 V ~ 34 V Protection type: shut down o/p voltage, re-power on to remove |
| Over Temperature | Shut down o/p voltage, re-power on to recover |
| Environment | |
| Operating Temperature | -40 °C ~ +70 °C (refer to "derating curve") |
| Storage Temperature | -40 °C ~ +80 °C |
| Operating Humidity | 20% ~ 95% RH non-condensing |
| Storage Humidity | 10% ~ 95% RH |
| Temp. Coefficient | ± 0.03% / °C (0 ~ 50 °C) |
| Vibration | 10 ~ 500 Hz, 5G 12 minutes / 1 cycle, period for 72 minutes each along X, Y, Z axes |
| Withstanding Voltage | I/P-O/P: 3.75K VAC |
| Isolation Resistance | I/P-O/P:100M Ohms / 500 VDC / 25°C / 70% RH |
| EMC Emission | Compliance to FCC Part 15 |
| Certifications | UL8750 listed, CSA C22.2 No. 250.13-12 IP67 (for main body) approved |
| Dimensions | 6 23/32" (171 mm) L x 2 15/32" (63 mm) W x 1 15/32" (37.5 mm) H |
| Additional | |
| Mean Time Before Failure | >292 800 hours MIL-HDBK-217F (25 °C) |
| Packaging | 0.83 Kg; 16 pcs / 14.3 Kg / 1.01 ft3 |
Notes:
1. All parameters not specially mentioned are measured at 230 VAC input, rated load and 25 °C of ambient temperature
2. Ripple & noise are measured at 20 MHz of bandwidth by using a 12? twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor
3. Tolerance: Includes set up tolerance, line regulation and load regulation
4. Length of set up time is measured at cold first start. Turning on / off the power supply may lead to increase of set up time
Please contact us for order information.
COMPATIBLE PRODUCTS
