
LumiLite
2 mm Lightweight LED Light Panel
Our new 2mm LumiLite panel is both ultra-light and ultra-thin adding another dimension to your design projects. The panel is only 0.5/lbs per sq ft and thin enough for the even deflection of light in the lowest profile applications. The lightweight nature of this product allows for lower shipping costs and easier installation. Consider the possibilities for your design with thinner available profiles.
  Â
Lightweight
At only 0.5 lbs / sq ft (0.23 kg / sq m), LumiLite is easy to ship and install.
Even
Our patented 3D V-cutting process provides consistent and even light distribution.
Custom
Available in custom sizes.
Cost Effective
Priced for excellent value.
Efficient & Lasting
Gives high brightness (2000 to 10 000 lux) and uses 70% less power than fluorescents. Lasts 70 000+ hours.
PRODUCT VIDEO
COMMON APPLICATIONS
- Lit walls
- Backlit graphics
- Lit fixturing
Electrical | |
---|---|
Input Voltage | 24 VDC |
Power Consumption | 5.2 W/ft (standard) |
Wire Size | 20 AWG 2 wire |
Wiring | One power cord is required per lit side with up to 2 lateral lit sides per panel. Each panel must have direct connection to power supply. Do not wire panels in series |
Connector | 2.1 / 5.5 mm barrel plug Standard 5' (1500 mm) Optional 10' (3000 mm) |
Certification | UL recognized component |
Physical | |
Color Temperature | 2700 K 3000 K 4100 K 5300 K 6500 K |
Mounting | Wall mounted with edge clips / standoffs |
Operating Temperature | -30 °C (-22 °F) ~ +40 °C (+104 °F) |
Environment | Dry location only |
Thickness | Panel: 3/32” (2 mm) Extrusion: 3/8” (9.2 mm) |
Minimum Size | 2 1/2” (63.5 mm) L x 2” (50 mm) W |
Maximum Size | 96” (2438 mm) L x 48” (1219 mm) W |
Weight | 0.5 lbs / sq ft (0.23 kg / sq m) |
Accessories | |
Dimmers & Controllers | • Inline Dimmer With Remote - Dimming Option I • Inline Plug and Play Dimmer - Dimming Option I With No Remote • LED Dimming Module - Dimming Option P • Rotary Style Dimmer - Dimming Option R |
Plug-in Power Adapters | • Plug-in Power Adapter 24 V / 24 W • Plug-in Power Adapter 24 V / 96 W |
Hardwire Power Adapters | • Hardwire Power Adapter 12 V / 60 W or 24 V / 60 W • Hardwire Power Adapter 12 V / 150 W or 24 V / 150 W |
Spider Cables | Please refer to spider cables |
Notes:
- Acrylic and other manufacturing components and methods may contribute to an expansion or contraction of sizes based on environmental or tooling factors. Please allow a minimum of ± 1/8″ (3.175 mm) to compensate for any changes in the outside dimensions of this product
- LED Kelvin temperatures listed in this literature have been derived from raw LED data. Actual Kelvin ratings can vary +/- 200 K based upon environmental conditions including but not limited to inclusion into LGPs and the use of diffusion materials. A precise ANSI bin control system is utilized to help maintain LED conformity and to minimize variances
- DLC strives to maintain tight control over specification factors. However, specifications are subject to change on rare occasion. These changes may not be reflected here
Series Number | Size | Color Temperature | Illuminated Face Option | Cable Length | LED Location |
---|---|---|---|---|---|
LLX24- 2 mm depth 24 V | Length x Width (inch/mm) | 2700 K 5000 K | SFI: Single face DFI: Double face | WL15: 5’ (1500 mm) power cord with 2.1 / 5.5 mm barrel plug WL30: 10’ (3000 mm) power cord with 2.1 / 5.5 mm barrel plug | L1: LEDs along 1 long edge L2: LEDs along 2 long edges S1: LEDs along 1 short edge S2: LEDs along 2 short edges |
Notes:
- Acrylic and other manufacturing components and methods may contribute to an expansion or contraction of sizes based on environmental or tooling factors. Please allow a minimum of ± 1/8″ (3.175 mm) to compensate for any changes in the outside dimensions of this product
- LED Kelvin temperatures listed in this literature have been derived from raw LED data. Actual Kelvin ratings can vary +/- 200 K based upon environmental conditions including but not limited to inclusion into LGPs and the use of diffusion materials. A precise ANSI bin control system is utilized to help maintain LED conformity and to minimize variances
- DLC strives to maintain tight control over specification factors. However, specifications are subject to change on rare occasion. These changes may not be reflected here
COMPATIBLE POWER ADAPTERS (24 V)
COMPATIBLE DIMMERS & CONTROLLERS (24 V)