LumiFrost
Frameless, Diffused LED Light Panel
Great for custom shapes and thin channel letters
A diffused LED backlighting solution with a 3D effect. LumiFrost combines LumiSheet LED light panels with a sign white acrylic diffuser. It is illuminated across 5 surfaces: the top and 4 edges, to provide a 3D look. LumiFrost is relied on as an energy efficient, frameless, elegant signage solution with no hot spots.
   
Even
A sign white acrylic casing over LumiSheet provides dispersed light output.
Custom Cut
Available in custom shapes, including channel letters.
Efficient
High light output with low power use. Uses 70% less power than fluorescent alternatives.
Even
A sign white acrylic casing over LumiSheet provides dispersed light output.
Custom Cut
Available in custom shapes, including channel letters.
Efficient
High light output with low power use. Uses 70% less power than fluorescent alternatives.
- Even
A sign white acrylic casing over LumiSheet provides dispersed light output.
- Custom Cut
Available in custom shapes, including channel letters.
- Color Customization
Comes in a range of color temperatures, as well as full color RGB.
- Efficient
High light output with low power use. Uses 70% less power than fluorescent alternatives.
- Lasting
Our patented heat sink gives LumiFrost a lifespan of 70 000 hours.
COMMON APPLICATIONS
- Accent lighting
- Recessed lighting
- Channel letters
- Lit floors
- 3D lit sides
| Electrical | |
| Input Voltage | 12 VDC 24 VDC (optional) |
| Power Consumption | 4.0 W/ft (standard) 5.0 W/ft (RGB) 4.3 W/ft (static red, static green, or static blue) |
| Wire Size | 20 AWG 2 wire 22 AWG 4 wire (RGB) |
| Wiring | Each panel must have direct connection to power supply. Do not wire panels in series |
| Connector | 2.1 / 5.5 mm barrel plug (for non-RGB) Bare wire (for RGB) Standard 5' (1500 mm) Optional 10' (3000 mm) |
| Certification | UL Listed (LumiSheet embedded) |
| Physical | |
| Color Temperature | 3000 K 3500 K 4100 K 5300 K 6300 K CCT (2700 K ~ 6500 K) RGB Static red Static green Static blue |
| CRI | ≥ 90 available |
| Mounting | Consult with your DLC representative for options |
| Operating Temperature | -30 °C (-22 °F) ~ +40 °C (+104 °F) |
| Environment | Dry location only |
| Thickness | 1” (25 mm) |
| Minimum Size | 3” (76 mm) L x 3” (76 mm) W |
| Maximum Size | 96” (2438 mm) L x 48” (1219 mm) W |
| Weight | 5.85 lbs / sq ft (30 kg / sq m) |
| Accessories | |
| Dimmers & Controllers | • CCT Controller • Dimmable Magnetic Low Voltage Transformer - Dimming Option M • Inline Dimmer With Remote - Dimming Option I • Inline Plug and Play Dimmer - Dimming Option I With No Remote • LED Dimming Module - Dimming Option P • Rotary Style Dimmer - Dimming Option R |
| Plug-in Power Adapters | • Plug-in Power Adapter 12 V / 60 W • Plug-in Power Adapter 24 V / 24 W • Plug-in Power Adapter 24 V / 96 W |
| Hardwire Power Adapters | • Hardwire Power Adapter 12 V / 60 W or 24 V / 60 W • Hardwire Power Adapter 12 V / 150 W or 24 V / 150 W |
| Spider Cables | Please refer to spider cables |
Profile View
Front View
Notes:
- Acrylic and other manufacturing components and methods may contribute to an expansion or contraction of sizes based on environmental or tooling factors. Please allow a minimum of ± 1/8″ (3.175 mm) to compensate for any changes in the outside dimensions of this product
- Our tunable white LEDs utilize separate warm and cool white channels for color mixing. 3rd party controls must account for proportional balancing/mixing of the two channels. Example: 3000 K (Warm White) = 3000 K 100% ON & 6500 K (Ultra White) OFF, Balancing/Mixing of both = 3000 K 50% ON & 6500 K 50% ON, 6500 K = 3000 K OFF & 6500 K 100% ON. Both channels cannot be allowed to operate at 100% simultaneously as the LED are not engineered to handle such high current
- LED Kelvin temperatures listed in this literature have been derived from raw LED data. Actual Kelvin ratings can vary +/- 200 K based upon environmental conditions including but not limited to inclusion into LGPs and the use of diffusion materials. A precise ANSI bin control system is utilized to help maintain LED conformity and to minimize variances
- DLC strives to maintain tight control over specification factors. However, specifications are subject to change on rare occasion. These changes may not be reflected here
| Series Number | Size | Color Temperature | Illuminated Face Option | Cable Length | LED Location |
|---|---|---|---|---|---|
| LLF12 25 mm 12 V LLF24 25 mm 24 V | CS: Custom shape (drawing may be required) | 3000 K 3500 K 4100 K 5300 K 6300 K CCT (2700 K ~ 6500 K) RGB Static red Static green Static blue | SFI: Single face | WL15: 5' (1500 mm) power cord with 2.1 / 5.5 mm barrel plug WL30: 10' (3000 mm) power cord with 2.1 / 5.5 mm barrel plug 5' (1500 mm) bare wire for RGB | L1: LEDs along 1 long edge L2: LEDs along 2 long edges S1: LEDs along 1 short edge S2: LEDs along 2 short edges S4: LEDs along all 4 edges CI: Custom illumination |
Notes:
- Acrylic and other manufacturing components and methods may contribute to an expansion or contraction of sizes based on environmental or tooling factors. Please allow a minimum of ± 1/8″ (3.175 mm) to compensate for any changes in the outside dimensions of this product
- Our tunable white LEDs utilize separate warm and cool white channels for color mixing. 3rd party controls must account for proportional balancing/mixing of the two channels. Example: 3000 K (Warm White) = 3000 K 100% ON & 6500 K (Ultra White) OFF, Balancing/Mixing of both = 3000 K 50% ON & 6500 K 50% ON, 6500 K = 3000 K OFF & 6500 K 100% ON. Both channels cannot be allowed to operate at 100% simultaneously as the LED are not engineered to handle such high current
- LED Kelvin temperatures listed in this literature have been derived from raw LED data. Actual Kelvin ratings can vary +/- 200 K based upon environmental conditions including but not limited to inclusion into LGPs and the use of diffusion materials. A precise ANSI bin control system is utilized to help maintain LED conformity and to minimize variances
- DLC strives to maintain tight control over specification factors. However, specifications are subject to change on rare occasion. These changes may not be reflected here
COMPATIBLE POWER ADAPTERS (12 or 24 V)
COMPATIBLE DIMMERS & CONTROLLERS (12 or 24 V)
