skip to Main Content

12V / 60W Hardwire Power Adaptor

Save

Save

Save

Save

Save

Save

Save

Save

A low cost, 60 W constant voltage hardwire power adapter with UL Class 2 certification

KEY FEATURES & BENEFITS

  • Consistent voltage design
  • Universal AC input / full range
  • Epoxy encapsulated with IP67 level
  • Withstand 3000 VAC surge input for 5 seconds
  • Protections: Short circuit / Overload / Over voltage
  • Fully isolated plastic case
  • Cooling by free air convection
  • Class 2 power unit
  • 100% full load burn-in test
  • Low cost, high reliability

For your ease of reference, all product specifications have been provided in the form of a ready-to-download PDF.

General Information

Input
Voltage Range90 ~ 264 VAC
Frequency Range47 ~ 36 Hz
Power FactorPF 0.95 / 230 VAC; PF 0.98 / 115 VAC at full load and rated output voltage; PF 0.9 at 75 ~ 100% load
Efficiency83%
AC Current1.2 A (rms) / 115 VAC; 1 A (rms) / 230 VAC
Inrush CurrentCold start 30 A / 115 VAC; 60 A / 230 VAC
Leakage Current< 250 uA / 240 VAC
Output
DC Voltage12 VDC
Constant Current Region19 ~ 12 V
Rated Current5 A
Power60 W
Current Range0 ~ 5 A
Ripple and Noise 2120 mVp-p
Voltage Tolerance 3± 5%
Line Regulation± 1%
Load Regulation± 2%
Setup, Rise Time 4500 ms, 20 ms / 230 VAC / 115 VAC; 500 ms, 20 ms / 115 VAC at full load (for 5 ~ 36 V)
Hold Up Time (Typ.)50 ms / 230 VAC; 16 ms / 115 VAC at full load
Protection
Over Current 5100 ~ 150% rated output power
Over Voltage 613.8 V ~ 16.2 V
Environment
Operating Temperature-30 °C ~ +70 °C (refer to output load derating curve)
Storage Temperature-40 °C ~ +80 °C
Operating Humidity20% ~ 90% RH non-condensing
Storage Humidity10% ~ 90% RH
Temp. Coefficient± .03% / °C (0 ~ +50 °C)
Vibration10 ~ 500 Hz, 2G 10 minutes / 1 cycle, period for 60 minutes each along X, Y, Z axes
Class 2 CompliantYes
Withstanding VoltageI/P-O/P: 3 kVAC
Isolation ResistanceI/P-O/P: >100 M Ohms / 500 VDC / 25°C / 70% RH
EMI Conduction & RadiationCompliance to EN55022 (CISPR22) Class B
Harmonic CurrentCompliance to EN61000-3-2,-3
EMS ImmunityCompliance to EN61000-4-2,3,4,5,6,8,11; ENV50204, EN55024, light industry level, criteria A
CertificationsUL Class 2, CAN / CSA, IP67 approved
MaterialPlastic case
Dimensions6 13/32” (162.5 mm) L x 1 11/16” (42.5 mm) W x 1 1/4” (32 mm) H
Additional
Mean Time Between Failures> 732 000 MIL-HDBK-217F (25 °C)
Packaging0.4 Kg; 32 pcs / 13.8 Kg / .56 ft3